DWM 13000 ST
The DWM 13000 ST comes with steel cable, which stands up to wear and heat better than rope. The same winch with synthetic rope is the DWM 13000 ST-S. On the first cable layer the winch spools in at 5.9 m/min with no load and 0.8 m/min at full load. On the last (5th) layer the pulling capacity is 2889 kg, so for a heavy pull, spool the cable out first so you work on the lower layers.
Options
Choose the right version on the product page before adding to basket:
- With 20 m of cable – gets you out and leaves more room on the drum, but the reach is short
- With 30 m of cable – more reach when there is no anchor point nearby, but you need to take more care when spooling it onto the drum
Use
- 4x4s and pickups
- Off-roading and expeditions
- Service and work vehicles
Specifications
- Pulling capacity: 13,000 lb / 5897 kg
- Voltage: 12 V
- Motor: 6.8 hp
- Gearbox: 3-stage planetary gearbox
- Gear ratio: 265:1
- Brake: dynamic
- Steel cable: 20 m or 30 m
- Line speed on 1st layer: 5.9 m/min no load, 0.8 m/min at full load
- Current draw at full load: 448 A (12 V), 245 A (24 V)
- Pulling capacity by layer: 5897 / 4658 / 4009 / 3463 / 2889 kg (layers 1–5)
- Drum capacity: 30 m
- Mounting hole spacing: 254 mm × 114 mm
- Dimensions (L×W×H): 546 mm × 166 mm × 244 mm
- Product code: DWM 13000 ST
- Series: Dragon Winch Maverick
Installation
The 254 × 114 mm mounting hole spacing is a common standard for full-size winches, so the winch fits most winch mounting plates and bumpers with a winch mount.
At full load the winch draws up to 448 A, so connect the power cables directly to the battery and keep the engine running while winching.
In the box: the steel cable winch comes with a roller fairlead. Other contents are shown in the product photos.
Delivery
Shipped by courier. We will confirm the delivery time when the order is confirmed.