Warn VRX 25 body without cable
Warn VRX 25 winch body without cable – 1134 kg pulling capacity, gear ratio 153:1. On the first layer it spools at 5.3 m/min with no load and 2.1 m/min at full load. VRX is Warn's ATV and UTV winch based on 4WD hub-lock free-spool technology: IP68 sealing, an all-metal gear train and a mechanical load-holding brake.
This is the winch body only, without cable or rope. It suits you if your old winch is broken but the mounting, fairlead and wiring are still in place, or if you want to choose the cable and fairlead yourself. Replaces older Warn models: ProVantage 2500, ProVantage 3000, RT/XT25, RT/XT30, Vantage 3000, 2.5ci and 3.0ci.
Use
- ATVs
- Trailers (boat and car trailers)
Specifications
- Pulling capacity: 2,500 lb / 1134 kg
- Voltage: 12 V
- Motor: 12 V DC permanent magnet motor
- Gearbox: all-metal 3-stage planetary gearbox
- Gear ratio: 153:1
- Brake: mechanical spring brake, holds the load
- Free spool: lever-operated free spool (WARN 4WD hub lock technology)
- Cable/rope: ordered separately
- Drum: aluminium, ⌀ 51 mm, width 75 mm
- Fairlead: ordered separately
- Line speed on 1st layer: 5.3 m/min with no load, 2.1 m/min at full load
- Current draw: 20 A with no load, 159 A at full load
- Remote control: ordered separately
- Switch: ordered separately
- Battery cables: 8.3 mm², length 2.4 m
- Protection rating: IP68
- Salt spray test: 240 h
- Dimensions (L×W×H): 335 × 121 × 121 mm
- Mounting holes: 76.2 × 123.7 mm, 4 bolts (the standard ATV winch mounting plate pattern)
- Mounting bolts: M8 x 1.25 x 20
- Product code: 101024
- Manufacturer: WARN Industries, made in: USA
Installation
At full load the winch draws up to 159 A. Connect it directly to the battery, not through the vehicle wiring.
ATVs and UTVs need a model-specific winch mounting plate (sold separately).
When replacing an old winch, check the dimensions and mounting holes before ordering.
Delivery
Shipped by courier. We will confirm the delivery time when the order is confirmed.