Warn VRX 45-S Multi-Mount kit
Warn VRX 45-S Multi-Mount kit – 2041 kg pulling capacity, synthetic rope 15 m × 6.3 mm, gear ratio 198:1. On the first layer it spools in at 4.9 m/min with no load and 1.3 m/min at full load. The VRX is Warn's ATV and UTV winch, based on its 4WD hub lock free spool technology: IP68 sealing, all-metal gearbox and a mechanical load brake.
All the electronics are pre-wired in the mounting base, so there is no separate contactor and no cables to run. The base fits any 2″ Class III hitch receiver. Each vehicle only needs a Quick-Connect wiring harness (sold separately). The kit includes an illuminated switch and a wired remote control.
Use
- Recovering a stuck vehicle
- Light utility vehicles
- Pickups
- UTV / side-by-side
- Trailers (boat and car trailers)
Specifications
- Pulling capacity: 4,500 lb / 2041 kg
- Voltage: 12 V
- Motor: 12 V DC permanent magnet motor
- Control: contactor
- Gearbox: all-metal 3-stage planetary gearbox
- Gear ratio: 198:1
- Brake: mechanical spring brake, holds the load
- Free spool: lever-operated free spool (WARN 4WD hub lock technology)
- Cable/rope: synthetic rope 15 m × 6.3 mm
- Drum: aluminium, ⌀ 51 mm, width 119 mm
- Fairlead: black powder-coated aluminium hawse fairlead
- Line speed on 1st layer: 4.9 m/min no load, 1.3 m/min at full load
- Current draw: 20 A no load, 252 A at full load
- Remote control: wired remote control and illuminated switch, mounted on the Multi-Mount base
- Battery cables: 13.3 mm², length 1.0 m, with red 175 A quick connector
- Protection rating: IP68
- Salt spray test: 240 h
- Dimensions (L×W×H): 380 × 121 × 121 mm
- Product code: 111826
- Manufacturer: WARN Industries, made in: USA
Installation
At full load the winch draws up to 252 A. Connect it directly to the battery, not through the vehicle's wiring.
In the box: the synthetic rope winch comes with an aluminium hawse fairlead. Other contents are shown in the product photos.
Delivery
Shipped by courier. We will confirm the delivery time when the order is confirmed.