Husar BST 13500 EN

Husar BST 13500 EN is a Husar electric winch built to the EN 14492-1 standard, with 6123 kg pulling capacity and a 450:1 gear ratio. The high gear ratio makes it slower than a standard 4x4 winch, but the load stays under control. Steel cable 30 m × 11 mm, weight 78 kg.

Use

• Worksites and industry where the winch must comply with EN 14492-1
• Tow trucks and car transporters
• Special machinery

Specifications

• Pulling capacity: 13,500 lb / 6123 kg
• Voltage: 24 V
• Motor: 7.5 hp / 5.5 kW
• Gearbox: 3-stage planetary gearbox
• Gear ratio: 450:1
• Steel cable: 30 m × 11 mm
• Line speed on 1st layer: 4.9 m/min no load, 1.4 m/min at full load
• Current draw at full load: 280 A
• Pulling capacity by layer: 6123 / 4490 / 3765 / 3175 kg (layers 1–4)
• Drum capacity: 28.5 m
• Fairlead: 4-way roller fairlead
• Control: wired and wireless remote control
• Mounting hole spacing: 254 × 114.3 mm
• Dimensions (L×W×H): 590 × 226 × 265 mm
• Weight: 78 kg
• Product code: BST 13500 EN
• Manufacturer: Husar Winch, Poland

Installation

Mounting hole spacing is 254 × 114.3 mm.

At full load the winch draws up to 280 A, so connect the power cables directly to the battery and keep the engine running while winching.

This is a 24 V winch – it is not suitable for a 12 V vehicle.

In the box: the steel cable winch comes with a roller fairlead. Other contents are shown in the product photos.

Delivery

Weight 78 kg, shipped by freight. It won't fit in a parcel locker. We will confirm the delivery time when the order is confirmed.